Registration-hole punching machines
R2-1000 Vision-Aligned Roll-to-Roll Automatic Punching Machine
R2-1000 Vision-Aligned Roll-to-Roll Automatic Punching Machine is designed for FPC and flexible circuits and film, PI, copper foil, PET and ITO. Working range, accuracy, cycle time and material handling must be confirmed against the actual workpiece and stated test conditions.
Submit project requirements →
Vision alignment for registration-hole punching
APPLICATIONS
Materials and process applications
Material, surface, dimensions, tolerance and measurement conditions must be verified with the actual workpiece.
- ✓FPC and flexible circuits
- ✓Film, PI, copper foil, PET and ITO
- ✓Touch panels and membrane switches
- ✓Registration-hole punching
DETAILS
Published specifications and configuration notes
- 01
Machine feature: 0.26 s/hole processing time; ±20 µm accuracy under the stated test conditions
- 02
Machine feature: Tension levelling, clamping and EPC edge-position control stabilise web tracking and workpiece flatness
- 03
Machine feature: Built-in accuracy check supports continuous accuracy monitoring for 24-hour operation
- 04
Working area: roll material, maximum: Φ300 mm, minimum: Φ100 mm, width: 250 mm × length: 500 mm
- 05
Processing accuracy: ±20 µm relative to the printed registration mark
- 06
Processing speed: 0.26 s/hole at 5 mm pitch with linear Y-axis travel, measured with COMWEB standard test film
- 07
Punch diameter: standard Φ2, Φ3 and Φ3.175 mm; custom Φ1.5–4 mm by project specification
- 08
Illumination: white backlight
Published specifications apply under their stated test conditions. Final specifications, test methods and acceptance criteria are defined in the project documents and verified with the actual workpiece.
RELATED SOLUTIONS