Registration-hole punching machines
AP-380 Vision-Aligned Automatic Registration-Hole Punching Machine
AP-380 Vision-Aligned Automatic Registration-Hole Punching Machine is designed for FPC and flexible circuits and film, PI, copper foil, PET and ITO. Working range, accuracy, cycle time and material handling must be confirmed against the actual workpiece and stated test conditions.
Submit project requirements →
Vision alignment for registration-hole punching
APPLICATIONS
Materials and process applications
Material, surface, dimensions, tolerance and measurement conditions must be verified with the actual workpiece.
- ✓FPC and flexible circuits
- ✓Film, PI, copper foil, PET and ITO
- ✓Touch panels and membrane switches
- ✓Registration-hole punching
DETAILS
Published specifications and configuration notes
- 01
Machine feature: 0.18 s/hole processing time; accuracy within ±0.025 mm under the stated test conditions
- 02
Machine feature: Fully automatic loading and unloading supports one-operator, multi-machine production
- 03
Machine feature: Built-in accuracy check supports continuous accuracy monitoring for 24-hour operation
- 04
Machine feature: High-frequency CCD acquisition supports shorter recognition cycles
- 05
Working area: X: 530–230 mm, Y: 300 mm／X: 500–230 mm, Y: 300–170 mm
- 06
Processing accuracy: ± 25μm (COMWEB standard test film)／± 25μm (COMWEB standard test film)
- 07
Punching speed: 0.18 s/hole (COMWEB standard test film)／0.18 s/hole (COMWEB standard test film)
- 08
Punch diameter: standard: Ø2, Ø3, Ø3.175 mm. custom: Ø0.8–3.2 mm／standard: Ø2, Ø3, Ø3.175 mm. custom: Ø0.8–3.2 mm
- 09
Illumination: white LED backlight; custom illumination available for either listed configuration
- 10
Restricted processing area: full-area processing with low-tack vacuum restraint; fixture configuration requires 8 mm from the material edge to the hole centre
Published specifications apply under their stated test conditions. Final specifications, test methods and acceptance criteria are defined in the project documents and verified with the actual workpiece.