Registration-hole punching machines
AP-650T Vision-Aligned Automatic Registration-Hole Punching Machine
AP-650T Vision-Aligned Automatic Registration-Hole Punching Machine is designed for FPC and flexible circuits and film, PI, copper foil, PET and ITO. Working range, accuracy, cycle time and material handling must be confirmed against the actual workpiece and stated test conditions.
Submit project requirements →
Vision alignment for registration-hole punching
APPLICATIONS
Materials and process applications
Material, surface, dimensions, tolerance and measurement conditions must be verified with the actual workpiece.
- ✓FPC and flexible circuits
- ✓Film, PI, copper foil, PET and ITO
- ✓Touch panels and membrane switches
- ✓Registration-hole punching
DETAILS
Published specifications and configuration notes
- 01
Machine feature: 0.23 s/hole processing time; accuracy within ±0.020 mm under the stated test conditions
- 02
Machine feature: Fully automatic loading and unloading reduces manual handling
- 03
Machine feature: Stack loading and stack unloading
- 04
Machine feature: Tension clamping supports material flatness during processing
- 05
Working area: X: 300–600 mm, Y: 250–500 mm
- 06
Processing accuracy: ± 20μm COMWEB standard test film
- 07
Punching speed: 0.23 s/hole
- 08
Punch diameter: standard: Ø2, Ø3, Ø3.175 mm. custom: Ø1–3.2 mm
- 09
Illumination: red backlight (white light optional), external coaxial light (optional)
- 10
Restricted processing area: approximately 10 mm (from board edge to punch center)
Published specifications apply under their stated test conditions. Final specifications, test methods and acceptance criteria are defined in the project documents and verified with the actual workpiece.